Semi Automatic Glass Bottle Washing Machine

Production Introduction

Semi automatic glass bottle washing machine, bottle type includes commonly used liquor, red wine, juice, beverage, edible oil bottle, hot sauce wide mouth bottle, honey bottle, tin can and other bottles, buckets, jars, cups of products. Special shaped bottle can be customized

Production Advantage

Semi automatic glass bottle washing machine：

1. save labor and effort, high production efficiency, and low water consumption, simple structure, convenient maintenance.

2, suitable for all kinds of bottle material old and new bottle impact control.
3. Spray the outer wall of the bottle, wash the inner wall at the same time, flush the bottle clean.
4, contact liquid parts of the surface are all made of stainless steel, corrosion resistance, beautiful and generous. Meet hygiene standards.
5, work efficiency, according to customer needs, can use stepless speed motor, the efficiency of the corresponding change.

Technical Parameters

Characteristics Of The Machine

1. Use old and new bottles of various types and materials to rinse:

2. Spray the outer wall of the bottle, wash the inner wall, flush the bottle clean;

3. Adopt tap water or pressure flushing of booster pump, which has wide adaptability;

4, simple structure, easy maintenance, stainless steel storage bucket, beautiful, easy to corrosion; 5, save labor and effort, high production efficiency, suitable for small and medium-sized enterprises.

Principle Of Flushing Bottles

1. The outer wall of the Semi automatic glass bottle washing machine is sprayed with nozzle, and the spray pressure can be adjusted by the size of the water intake.

2. The inner wall of the bottle is flushed by positioning flushing, and the flushing mouth is fixed on the bracket. When the water in the valve body is in contact with the outlet hole, the water is pressurized through the nozzle to flush the bottle with the leakage head.

The Use Of Methods

1. Before use, first check whether all kinds of bottle funnels are firmly installed, whether the water outlet of the water storage bucket is connected with the water pipe, and then the water inlet pipe

Make sure the motor wiring is intact. .

2. Turn on the power supply, start the machine to run, load the bottle and open the water inlet switch (or start the pump) at the same time.

3, by adjusting the water intake to get the appropriate bottle flushing pressure.

4, shut down the water inlet switch (or pump), and then cut off the power supply.

Maintenance And Repair

1. Semi automatic glass bottle washing machine transmission worm gear and worm should be refueled once a day.

2. Check the sturdiness of each sturdy part of the bottle flushing machine at any time and whether the motor belt is loose and slippery.

3. When it is found that the nozzle pressure of the bottle flushing machine is insufficient or no pressure, poke the water nozzle several times with the iron wire, and discharge it if it still fails

Lower the spout for cleaning.

4. When the flushing effect of the machine is not good, first check whether the water pressure is normal, and then check the management and whether the road is blocked.

Hot Tags: semi automatic glass bottle washing machine, China, suppliers, manufacturers, factory, customized, wholesale, buy, price, quotation, cost, for sale, siphon bottle fillers, metal cap capping machine, manual ice cream filling machine, wine bottle labeling machine, small wine filling machine, wine bottle filling machine