Rotary Bottle Washing Machine

Rotary bottle washing machine is a necessary equipment for soda, beer, juice, liquor, sesame paste, sesame oil, honey and other narrow mouth bottles and wide mouth bottles. Suitable for a variety of different specifications of bottle shape, wide range, strong applicability, low failure rate, less wearing parts and so on. The machine is easy to operate, economical and practical. The use of this equipment can completely liberate workers from the heavy manual brushing operations, greatly improving production efficiency.

Rotary bottle washing machine is composed of body, motor, brush shaft operating table, reducer, external brush, internal brush, bottle holder, flushing rod, sprocket, bottle tank and other main parts. All parts of the machine are made of national standard materials, its design is reasonable, simple structure, beautiful appearance, easy operation and maintenance.

When the rotary bottle washing machine is working, put the inner brush rod into the brush shaft hole and tighten it with screws. Then start the machine, and the inner brush rotates under the drive of the brush shaft. At this time, the soaked bottle can be pushed inward with the hand to the rotating inner brush. (One person operates two bottles at the same time.) When the inner brush touches the bottom of the bottle, push the bottle outward, repeat several times, until the inside of the bottle has been cleaned, and then push the bottle inside while releasing the hand to let the outer brush hold the bottle. The bottle will rotate and brush the outside of the bottle under the drive of the internal brush, when the bottle inside and outside all brush can be inverted into the bottle bracket hole above the machine, and then the motor through the reducer to make the sprocket get six revolutions per minute low-speed movement, driven by the sprocket, the bottle bracket chain on the body for periodic movement, when the bottle bracket drive the bottle through the spray nozzle, with a certain pressure of water will be shot into the bottle. Each bottle passes through seven holes during its movement.

The flushed bottle continues to move, drain, remove in the appropriate position, and pass the clean bottle to the next process. (The bottle holder is made of non-toxic hard plastic, non-toxic and tasteless, and has the characteristics of wear resistance and corrosion resistance.)

1, access the power supply, start the machine to run, and at the same time on the bottle and open the water switch (or start the pump)

2, before the application, first check whether all kinds of bottle funnel is installed firmly, water storage bucket outlet is not connected to the water pipe, and then connect the water inlet pipe, to determine the motor wiring is complete.

3, shut down, turn off the water switch (or pump), and then disconnect the power.

4, the use of adjusting the water intake to obtain the appropriate flush bottle working pressure.

Hot Tags: rotary bottle washing machine, China, suppliers, manufacturers, factory, customized, wholesale, buy, price, quotation, cost, for sale, fruit and vegetable air bubble washer, potatoes washing machine, onion drying machine, carrot washer machine, air bubble washing machine, air drying machine