Glass Bottle Labeling Removing Machine

1. The Glass Bottle Labeling Removing Machine has a frequency converter, with the turntable rotating at 1.2 revolutions per minute. If it has a speed control, it can be slowed down, but not faster.

2. External spraying and bottle brushing removes labels; internal brushing only removes labels. External brushes should be replaced once a year; internal brushes should be replaced every 3-5 days, depending on condition.

3. The 18-head Glass Bottle Labeling Removing Machine has 18 sets of external brushes (assembled from two types of brushes, 9 sets each, at the same price), 18 plastic brushes, and 4 plate brushes. The 36-head machine has 36 sets of external brushes (assembled from two types of brushes, 18 sets each, at the same price), 36 plastic brushes, and 8 plate brushes.

4. The 18-head Glass Bottle Labeling Removing Machine uses 0.5 cubic meters of water per hour; the 36-head machine uses 1 cubic meter of water per hour. The amount of water used is controlled by a valve and cannot be recycled.

5. Waste paper scraps fall to the ground. After get off work, wash the floor with water and clean it.

6. The reducer on the motor needs an oil change, approximately 3 liters each time. It only needs to be replaced once every one to two years, which can increase its lifespan.