How to operate the automatic dumpling machine?
step1. Kneading. The surface of the dough should be smooth, and the dumplings will be more beautiful.
Add water to a pound of flour, don't add too much, the dough will be too soft if you add too much water, and the machine will not be able to wrap it, and don't add too little, the dough will be hard if you add too little water It is easy to air dry as it grows.
step2. Mix the prepared meat filling or vegetarian filling well and set aside.
1. Connect the automatic dumpling machine to the power supply, turn on the supply switch to idle, and listen to see if there is any abnormal sound. If there is any abnormal sound, please turn off the power and contact the manufacturer.
2. Turn on the filling supply switch and listen to see if there is any abnormal sound. If so, please contact the manufacturer to solve it. Do not disassemble or assemble the machine if you do not understand it.
step3
1. Before starting the machine, check whether there are foreign objects in the power switch, forming mold, dumpling car and dough conveyor belt.
2. Place the cut noodles on the noodle rack, turn on the "Long Stop" button, click the "Power On" switch to keep the machine in a power-on state, click the "Noodle Input Start" button, and roll the noodles through the three rollers in turn. . Start the button of the forming die to match the speed with the technological requirements of the speed of the dough. At this time, the dough is shaped into a dumpling shape through the forming die, adjust the speed of the die and the dough, and adjust the gap of the rolling wheel at the same time, so that the weight of the dough meets the technological requirements.
4. Turn on the box feeding switch and adjust the speed to make the single weight of the dumplings meet the technological requirements.
5. When there is a tight situation, press the main stop switch, the machine is in a power-off state, and turn off the switch of the box and the surface forming plate in turn to deal with the fault in time.
6. At the end of the work, clean all parts. Remember, the cleaning work cannot be carried out under the power-on state.
