Operation method of edible oil filling machine
1. Check before use: After the machine is installed, turn on the power and try to run the three-phase motor to ensure that the direction of rotation is correct, to ensure the pressure and flow of compressed air, and to check whether each motor, bearing, etc. need to be oiled. It is strictly forbidden to run without oil. After normal operation, the machine can be started, and the fasteners of each part can be observed for looseness at the same time. After the operation of each part is stable, the machine can be used normally;
2. Check whether the safety facilities function normally;
3. Before starting the machine, check carefully whether there is water in all water tanks, whether the chain plates are stuck, whether there are sundries on the conveyor belt, whether there are bottle caps in the lid box, whether the water source, power source, and air source are several barrels, wait for all to be ready After closing the main power supply, the power indicator light is on, the fault indicator light and the emergency stop indicator light are off, then the starting conditions are met, press the start button on the control box and the start switch at the filling point, the whole machine starts running, and enters the outside washing , Washing and filling are fully automatic working mode. When the machine is stopped, press the stop button at the filling place and the control box to stop the machine and cut off the main power supply.
